Audi TT 1999-2006 2DR Vertical Lambo Doors

Name: Audi TT 1999-2006 2DR Vertical Lambo Doors
Brand: Vertical Doors, Inc.
SKU: VDCAUDITT9906
Price: 1099.00 USD
Availability: InStock

Made in the USA by Vertical Doors, Inc.Part # VDCAUDITT9906

$1,099 $1,499 Made to order

Made to order by Vertical Doors, Inc.: ships in 10–15 business days, then 3–5 days by FedEx Ground in the US.

Fits Audi TT 1999–2006. Check yours:

Total · free US shipping

$1,099

or pay with

Kits for more than one car?

Each kit fits one car model. Add this one, then your next car’s; pay once for all.

// About this kit

Part number: VDCAUDITT9906
Fits: Audi TT1999–2006
Made by: Vertical Doors, Inc., USA
In the kit: Left and right hinge assemblies, gas shocks, mounting hardware, instructions

At its core this kit is a hinge swap. Part number VDCAUDITT9906 from Vertical Doors, Inc. converts the doors on your Audi TT to open vertically: a hardened steel hinge bolts in on each side using the factory bolt pattern, so there is no cutting or welding, and a gas shock carries the weight of the door as it swings up. Because it uses the stock mounting points, the conversion is completely reversible and the TT can go back to its original hinges whenever you want.

Two Vertical Doors, Inc. lambo door hinges, one for each side
Two gas shocks to hold the doors up once open
All mounting hardware needed for the job

Fitment runs the full 1999-2006 Audi TT two-door range and covers every trim in those years. The hinges are hardened steel, made and patented in the USA by a company that has been building these conversions for more than 20 years and is the only manufacturer producing vertical lambo door kits in the country. Each kit ships with an instruction manual of roughly 6 to 12 pages plus free tech support, and we recommend having a professional installer handle the work using those supplied instructions.

// The part you’re buying

Drag to turn it, Space to open the door, Z to zoom on the hinge, X to take it apart.

Shown: a typical VDI kit. Your kit is made for your car, so its exact plate, arm, brackets and shock differ from this drawing.

The kit you buy: mounting plate, pin and hub, swing arm, door bracket, gas shock, cam stop, boltsYour car: the body apron and the doorThe factory hinge it replacesThe kit starts as its separate pieces, then goes together in the order it's fitted. The door first swings out on the vertical pin, then lifts on the round bearing hub, and the gas shock holds it up: the two-stage motion in VDI's patent (US 6,845,547). Each kit has right and left hinge assemblies, two gas shocks, M8 bolts with washers, shoulder bolts and pins (VDI install manuals); set screw #2 and nut #1 adjust where the door closes. A typical kit, drawn from VDI's Crossfire manual: the plate, arm, brackets, shock and angles differ by vehicle, and each kit is made for its car.