Chevrolet Camaro 2010-2015 Vertical Lambo Doors

Name: Chevrolet Camaro 2010-2015 Vertical Lambo Doors
Brand: Vertical Doors, Inc.
SKU: VDCCHEVYCAM10
Price: 1199.00 USD
Availability: InStock

Made in the USA by Vertical Doors, Inc.Part # VDCCHEVYCAM10

$1,199 $1,599 Made to order

Made to order by Vertical Doors, Inc.: ships in 10–15 business days, then 3–5 days by FedEx Ground in the US.

Fits Chevrolet Camaro 2010–2015. Check yours:

Total · free US shipping

$1,199

or pay with

Kits for more than one car?

Each kit fits one car model. Add this one, then your next car’s; pay once for all.

// About this kit

Part number: VDCCHEVYCAM10
Fits: Chevrolet Camaro2010–2015
Made by: Vertical Doors, Inc., USA
In the kit: Left and right hinge assemblies, gas shocks, mounting hardware, instructions

This kit fits the 2010 through 2015 Chevrolet Camaro, covering every model year in that span and all trim levels. It is part number VDCCHEVYCAM10 from Vertical Doors, Inc., and it converts the factory doors to a vertical opening. The hinges mount to the factory bolt pattern, but VDI notes that a small, hidden part of each front fender has to be trimmed so the swing arm can move freely.

2 Vertical Doors, Inc. lambo door hinges, one for each side of the car
2 gas shocks that hold the doors up once they are raised
All mounting hardware needed to fit the kit

Each hinge is made in the USA from domestic hardened steel, and the design is patented here as well. Because the kit uses the stock mounting points, the conversion is completely reversible; unbolt it and the Camaro goes back to its original doors. An instruction manual is packed with the kit and VDI offers free tech support, but door alignment is exacting work, so we recommend having a professional shop do the install while following the supplied instructions.

// The part you’re buying

Drag to turn it, Space to open the door, Z to zoom on the hinge, X to take it apart.

Shown: a typical VDI kit. Your kit is made for your car, so its exact plate, arm, brackets and shock differ from this drawing.

The kit you buy: mounting plate, pin and hub, swing arm, door bracket, gas shock, cam stop, boltsYour car: the body apron and the doorThe factory hinge it replacesThe kit starts as its separate pieces, then goes together in the order it's fitted. The door first swings out on the vertical pin, then lifts on the round bearing hub, and the gas shock holds it up: the two-stage motion in VDI's patent (US 6,845,547). Each kit has right and left hinge assemblies, two gas shocks, M8 bolts with washers, shoulder bolts and pins (VDI install manuals); set screw #2 and nut #1 adjust where the door closes. A typical kit, drawn from VDI's Crossfire manual: the plate, arm, brackets, shock and angles differ by vehicle, and each kit is made for its car.

// Also for Chevrolet